Operating your Pirate Ship with TrainMaster Command Control
(continued)
Accessory Switch Controller wiring and operation
Three wires (not included) are needed to connect your Pirate Ship to the Accessory Switch
Controller (ASC) and a separate accessory transformer.
1. Attach one wire to the transformer Power/A terminal and connect it to the
COMM terminal on the ASC.
2. Connect one of the Pirate Ship terminals to a numbered accessory terminal
on the ASC.
3. Finally, connect the remaining Pirate Ship terminal to the transformer
Common/Ground/U terminal.
Use the AUX2 button on your CAB-1 Remote Controller to toggle the Pirate Ship ON and
OFF.
6
Common/Ground/U
Common/Ground/U
Power/A
Power/A
POWER
SUPPLY
Figure 4 ASC connections
