C
ongratulations on your purchase of the Lionel Scrap Yard accessory! Perfect for use on any
O gauge layout, this accessory features four animated features and a blue LED to simulate
the welder’s torch.
You may choose to attach a section of FasTrack track to one end of this accessory. If
you are using traditional O gauge track, you must use the FasTrack O Gauge
Transition Track (available separately, 6-12040) to connect the accessory to your
track. Do not attempt to operate your trains across the accessory.
2
Scrap Yard Inventory
• Scrap Yard accessory
• Four separate vent sections
• Switch
• Three wires
• Owner’s Manual
• Service Center list
Table of contents
Powering the accessory
3
Joining the FasTrack track sections
4
Operating the accessory
4
Controlling the accessory in the Command Control environment
4-6
Servicing the LED
7
Limited Warranty/Lionel Service
8
Note!
The following Lionel marks may be used throughout this instruction manual and are protected under law.
All rights reserved.
Lionel
®
, TrainMaster
®
, Odyssey
®
, RailSounds
®
, CrewTalk
™
, TowerCom
™
, DynaChuff
™
,
StationSounds
™
, Pullmor
®
, ElectroCoupler
™
, Magne-Traction
®
, CAB-1
®
Remote Controller,
PowerMaster
®
, Lionel ZW
®
, ZW
®
, PowerHouse
®
, TMCC
®
, Lionelville
™
, Lockon
®
, Wireless Tether
™
,
LionMaster
®
, FatBoy
™
, American Flyer
®
, TrainSounds
™
The name FasTrack
®
is used with permission from Pitsco, Inc.