Controlling the accessory in the Command Control environment
(continued)
SC-2 wiring and operation
T
hree wires are needed to connect the accessory to the SC-2 Switch and Accessory Controller
and a separate accessory transformer. Refer to Figure 4.
1. Attach one wire to the transformer Common/Ground/U terminal and connect it to the
accessory COMM (common) position on the SC-2.
2. Attach a wire to one of the accessory terminals and connect it to the accessory ON/OFF
toggle position on the SC-2.
3. Attach a wire to the other accessory terminal and connect it to the transformer Power/A
terminal.
Use the
AUX2
button on your CAB-1 Remote Controller to toggle the accessory
ON and OFF.
5
ACC2
ACC2
ACC1
ACC1
Figure 4. SC-2 connections
Underside of the
accessory
