Controlling the accessory in the Command Control environment
(continued)
Accessory Switch Controller wiring and operation
T
hree wires are needed to connect the accessory to the Accessory Switch Controller (ASC) and
a separate accessory transformer. Refer to Figure 5.
1. Attach one wire to the transformer Power/A terminal and connect it to the COMM terminal
on the ASC.
2. Attach a wire to one of the accessory terminals and connect it to a numbered accessory
terminal on the ASC.
3. Attach a wire to the other accessory terminal and connect it to the transformer
Common/Ground/U terminal.
Use the
AUX2
button on your CAB-1 Remote Controller to toggle the accessory
ON and OFF.
6
A
U
Figure 5. ASC connections
Underside of the
accessory
