background image

Congratulations! 

2

C

ongratulations on your purchase of the ready-to-run Three Rivers Fast Freight Train Set with 
the TrainSounds sound system! This set features everything you need to get started—a mighty 

CW-80 Transformer, a huge loop of FasTrack track, a string of detailed cars, and a powerful Lionel 
locomotive. Plus, you get the authentic locomotive sounds of the TrainSounds sound system.

Have fun growing with this complete train set! Start with the set components, then follow 

your imagination into your own miniature world. Expand your railroad empire with addition-
al FasTrack track sections, enhance your layout with accessories, lengthen your consist with 
extra cars, or operate a new locomotive at the head end of your train! Explore the possibilities 
at your authorized Lionel dealer.

Use this Owner’s Manual to learn how to set up, operate, and maintain your train set for 

years of reliable operation.

The transformer included with this set should be periodically 
examined for conditions that may result in the risk of fire, 
electric shock, or injury to persons (such as damage to the 
output cord, blades, housing, or other parts). In the event that 
such conditions exist, the transformer should not be used until 
properly repaired.

Parents!

Three Rivers Fast Freight Train Set Inventory

•  2-8-4 steam locomotive and tender with TrainSounds

•  Single dome tankcar

•  Flatcar with generator load

•  Four bay hopper

•  Caboose

•  CW-80 Transformer with accessory wire

•  Three straight FasTrack track sections

•  One 90° crossover track section

•  Four 5” straight FasTrack track section

•  Twelve curved FasTrack track sections

•  One straight FasTrack terminal track section

•  Replacement traction tire

•  Owner’s Manual

Three Rivers Fast Freight Train Set Features

•  Puffing smoke

•  Bright headlight

•  Forward-Neutral-Reverse  

operation

•  TrainSounds sound system

•  Operating couplers

•  Lighted caboose interior

71-1170-250_ThreeRivers_Fast Frt.indd   2

7/26/10   2:44 PM

Summary of Contents for Three Rivers Fast Freight

























Reviews: