background image

©2011 L

IONEL

 L.L.C., C

HESTERFIELD

, MI 48051-2493

U

NITED

 S

TATES OF 

A

MERICA

P

RINTED IN 

C

HINA

This Lionel VISION Line locomotive, including all mechanical and electrical components, 

moving parts, motors and structural components, with the exception of 

LIGHT BULBS, LED’s 

& TRACTION TIRES

 are warranted to the original owner-purchaser for a period of two (2) years 

from the original date of purchase against original defects in materials or workmanship when 

purchased through an 

Authorized Lionel Value Added Dealer

*.

This warranty does 

NOT

 cover the following: 

• 

Normal wear and tear

• 

Light bulbs or LED’s

• 

Defects appearing in the course of commercial use

• 

Damage resulting from abuse/misuse of the product

The original owner-purchaser MUST register this product following the 

instructions on the enclosed Warranty Registration Card to activate the 2-year 

warranty, which is effective from the original date of purchase.

Transfer of this product by the original owner-purchaser to another person voids this warranty 

in its entirety. Modification of this product in any way; visually mechanically or electronically, 

voids the warranty in its entirety. 

In the event service is required to this Vision Line locomotive, Lionel will, upon request of the 

original owner-purchaser, provide a prepaid UPS shipping label for the return of this product to 

the Lionel Service Department. Under no circumstances will shipping be reimbursed if a method 

other than a prepaid shipping label from Lionel is used. In the event the defective product cannot 

be repaired and a suitable replacement is not available, Lionel will, at its discretion, refund the 

original purchase price of the locomotive. 

This warranty will expire if the product is not registered within 3 years from the date of 

manufacture. An extended warranty may be available for purchase. Please contact Lionel 

Customer Service for more information regarding extended warranties. 

In no event shall Lionel LLC be held liable for incidental or consequential 

damages.

Some states do not allow the exclusion or limitation of incidental or consequential damages, 

so the above exclusion may not apply to you. This warranty gives you specific legal rights and you 

may have other rights which vary from state to state.

Instructions for Obtaining Service:

If service for this Lionel VISION Line locomotive is required please call Lionel Customer Service 

FIRST at 586-949-4100 and follow the prompts to reach a Customer Service Representative. You 

can also write Lionel at 26750 Twenty Three Mile Road, Chesterfield, MI 48051 to request a return 

authorization number and prepaid shipping label. You MUST have a return authorization (RA) 

number to ensure your locomotive can be properly tracked upon receipt at Lionel LLC. 

Once you have your Return Authorization (RA) number, make sure the item is packed in its 

original Styrofoam inner container which is placed inside the original outer display box (this will 

help prevent damage during shipping and handling).

Please make sure you have followed all of the above instructions carefully before returning any 

item for service. You may choose to have your product repaired by one of Lionel’s Factory Trained 

Authorized Service Stations after the warranty has expired. A reasonable service fee should be 

expected once the product warranty has expired. 

Warranty Information:

Please log on to  www.lionel.com – Customer Service – Resources _ Vision Line Locomotive 

Registration to register for your 2-year warranty. If you do not have internet access, please 

contact Lionel Customer Service at 586-949-4100. Please keep a copy of your original receipt 

along with the form below and your Vision Line locomotive ID number as a reference, should 

warranty service be required in the future. 

*A complete listing of Lionel Authorized Value Added Dealers can be found by calling 

1-800-4-LIONEL or by visiting our website at www.lionel.com. 

Products that are more than 3 years old, from date of manufacture, are not applicable for 

warranty coverage, however an extended warranty may be available for purchase, please contact 

Lionel Customer Service for details. 

Lionel VISION Line™ Locomotive Warranty

Summary of Contents for VISION Line 700E Hudson

































Reviews: