EN
The location of ISOFIX fasteners (20) may be adjusted so
that they fit the fixing points. It is necessary to slide the
ISOFIX adjustment belt (located on the child restraint base,
number 21). ISOFIX fixing points on both sides must pull out
as far as possible.
Connect both ISOFIX connectors (20) to the relevant fixing
points located in the car seat. Slide the child restraint
towards the vehicle seat backrest until it fits the backrest
tight. ISOFIX rails (20) will slip in and secure again (click) in a
new position. ISOFIX handle adjustment indicator (19) must
be green on both rails. Make sure there is no free space
between the child restraint and seat backrest.
To undo the connectors, press ISOFIX release button (18).
If you wish to fix the connectors again, repeat steps above.
Note!
Once the procedure has been completed, make sure it
is correct. To do so, move the base on both sides (right and
left) energetically and make sure it is stable.
How to assemble and disassemble the child restraint
from ISOFIX base
The child restraint may be installed in two positions: forward-
facing position and rear-facing position. If you want to
detach the child restraint from ISOFIX base (16), all you need
to do is press the release button (6).
If you want to attach the child restraint to ISOFIX base (16),
