6.
Connect another tube tip to the air outlet of the main
device.
7
. Choose a suitable mouthpiece or mask and apply on the
cap.
8.
Provide power supply to the device. Make sure the
device is switched off (O position) when providing the
power supply.
9
. Switch the device on (I position).
10.
After the use, switch the device off, unplug and clean
.
NOTE
Nebulizer will switch off when the device operates for a long
time and reaches a high temperature. If this happens:
1.
Switch the device off (O position).
2.
Unplug the device.
3.
Wait at least 30 minutes until the device has cooled
down. Make sure the air outlet and inlet is not obstruct
-
ed.
CLEANING AND MAINTENANCE
After every use:
1.
Switch the device off and unplug.
2.
Detach the tube from the air outlet.
3.
Remove the mouthpiece or mask and nebulizer cap.
4.
Rinse all elements in warm running water.
5.
Wipe the elements dry.
6.
Assemble the unit again.
Summary of Contents for Nebi 3.0
