3 FEATURES
◊
Basic principle of operation and ballistics based on the famous Fairchild
compressor
◊
Patented circuit completely eliminating distortion on low frequencies and on
low-release time – all other compressors on short release time and on low
frequencies changes amplification within single sine wave, commonly a
major source of distortion
◊
Extremely fundamental design based on patented "Lipinski Square" circuitry
◊
No capacitors in the signal path
◊
No Integrated Circuits (IC's) in the signal path
◊
Only 0.04% maximum distortion with the highest (18dB) compression
◊
Extremely fast attack time - 0.01ms (1/5th 20kHz sine wave)
◊
Tape Simulation doesn't generate gimmicky even-harmonic distortions. This
feature senses and triggers compression on high frequencies (correction
within control network)
◊
Auto gain: 5 sec attack time, and 5 min release time
◊
Auto control has ballistics similar to VU meter, it is based on photo resistor,
completely eliminates distortion with zero adjustment error - quality on
output signal totally independent of input level
◊
Dual peak meter pre and post compression
◊
Hard wiring option for stereo operation
Low-frequency distortion elimination system
In analogue compressors when short release time is set, low-frequency input
signals are considerably distorted. It occurs because the gain changes during a
single period of the signal. The Lipinski Patented circuit designed by our
engineers, eliminates this effect thoroughly.
Tape Simulation system
In a typical audio signal low-frequency components have greater level than high-
frequency components. Standard compression mode treats equally all
frequencies, which makes the sound very ‘sharp’. By turning Tape Simulation on,
compression for high-frequency components is increased by 3 dB.
Lipinski Sound Corporation Confidential Copyright © 2010 5
| Page
