background image

Operating manual LL12                             6/18                                       Version 1.6        (01/2017)

The following transport profiles are foreseen:

Transport of one person sitting in a wheelchair

Transport of one person sitting on the folding seat.

Transport  of  one  person  standing  on  the  platform,  provided  that  there  is  sufficient 
headroom and that the person has sufficient standing stability and can hold the hand 
grips securely (a separate set of documents is required, available on enquiry).

Transport  of  an  additional  person,  provided  that  there  is  sufficient  room  on  the 
platform and that the permissible loading capacity is not exceeded.

A usage profile of 10 start-ups per hour is foreseen (with distances covered of max. 5 m for 
each  start-up). In  the  case  of  longer  distances  covered,  the  number  of  start-ups  should  be 
reduced accordingly (and linearly).

The LL12 chair lift may be only operated if danger due to falling objects (such as flower pots) 
is ruled out.

Inappropriate use must be prevented, e.g.:

Exclusive use for loads (if, in rare cases, loads such as shopping or beverage crates are 
transported,  it  is  essential  to  ensure  that  the  load  is  sufficiently  stable  and  that  the 
permissible loading capacity is not exceeded).

Loads that protrude beyond the surface area of the opened base may in general not be 
transported (e.g. large pieces of furniture).

The LL12 platform lift is not a toy (children).

Operation in potentially explosive atmospheres

Operation outdoors

Operator qualification / technical personnel / qualified persons

The operator of the chair lift must have unrestricted mental abilities. Operators with seriously 
impaired vision may be transported only with an attendant, whereby the attendant issues the 
drive  commands. Furthermore,  the  operator  must  have  read  and  understood  the  operating 
instructions.
Technical personnel and/or qualified persons are described in the assembly and service 
manual.

Product description

Our products combine the requirements for overcoming stairs with outstanding integration in 
the familiar environment in an appropriate way.
The  maximum  permissible  load-carrying  capacity  is  225  kg,  standard  is  160  kg (measuring 
point for this is the centre of the platform base).
The continuous sound pressure level is less than 70 dB (A).
We recommend that you take out a service contract. This guarantees the technically optimum 
condition of your LL12 stair lift by means of regular maintenance. The maintenance interval is 
once a year.

2.1

2.3

2.2

2.4

Summary of Contents for LL12



















Reviews: