Rev: 11.29.18
Page 4
CCD-0001755
Measuring Departure and Approach Angle
Departure and approach angles are measured by running a string line from the meeting point of the tire and
ground up at an angle to the lowest point on the front or rear of the trailer. These string lines are shown as
dotted lines (Fig.1 and Fig. 2).
NOTE:
C-Jacks shown for reference only to mark proper locations.
Ground Draw Bar
Approach Angle
String Line
Departure Angle
String Line
Axle Hanger
Fig. 1
Departure Angle
String Line
Approach Angle
String Line
Ground
Fig. 2
Minimum Ground Clearance is 7"
Ground Clearance is 10.5" to 15"
