background image

Rev: 12.21.18

Page 2

CCD-0001440

System Information

The OneControl® Touch Panel (OCTP) is a touchscreen device that provides system controls and monitoring 

software for the recreational vehicle unit. The systems include slide-outs, leveling systems, awnings, lighting, 

temperature, water tanks, tire pressure, battery levels and any other compatible systems installed on the 

unit and programmed into the OneControl® system. Powering up the unit will also power the OneControl® 

Touch Panel and the various controllers throughout the unit. 

Operation

Power On/Off

1.  The device can be powered on or off using the button on the front of the device.

NOte: It will take a few moments to start up and load the system.

2.  To enter or exit sleep mode, press and release the power button.

Control Panel

1.  Locate OneControl® control panel (Fig. 1).

2.  Press the power button (Fig. 1A) to turn on the OneControl® Touch Panel.

3.  Press the icon of the system to be operated; i.e., awning, bed lifts, generator, etc. (Fig. 2).

NOte: The control panel will show icons representing the devices connected to the OneControl® system. 

Press the back button (Fig. 3A) at any time to return to the OneControl® home screen.

A

Fig. 1 

Fig. 2 

tABLe OF CONteNtS

System Information 

2

Operation 

2

Power On/Off 

2

Control Panel 

2

System Operations 

3

OneControl Resources 

10

OneControl

®

 Assembly 

13

OneControl

®

 Components 

14-19

Summary of Contents for OCTP





















Reviews: