2
574-537-8900
Rev: 11.11.20
Waste Master
®
Tubular
Storage Enclosure
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002186
Safety
Read and fully understand all instructions before installing
or operating this product.
Adhere to all safety labels.
This manual provides general instructions. Many variables
can change the circumstances of the instructions, i.e., the
degree of difficulty, operation and ability of the individual
performing the instructions. This manual cannot begin
to plot out instructions for every possibility, but provides
the general instructions, as necessary, for effectively
interfacing with the device, product or system. Failure
to correctly follow the provided instructions may result
in death, serious personal injury, severe product and/
or property damage, including voiding of the LCI limited
warranty.
NOTE:
Part numbers are shown for identification purposes
only. Not all parts are available for individual sale. All parts
with a link to the Lippert Store can be purchased.
Parts List
Resources Required
• 4” x 10’ Sch 40 PVC pipe
• 4” Sch 40 PVC end cap
• Large hose clamp to fit the
4" pipe
• All purpose PVC cement
• Strapping or 12” cable ties to
support storage tube
• Saw with fine-tooth blade for
metal and PVC
• Electric or cordless drill or
screw gun
• Appropriate drill bits
• Appropriate drive bits
• Tape measure
MOVING PARTS CAN PINCH, CRUSH OR CUT. KEEP
CLEAR AND USE CAUTION.
ALWAYS WEAR EYE PROTECTION WHEN PERFORMING
SERVICE OR MAINTENANCE TO THE UNIT. OTHER
SAFETY EQUIPMENT TO CONSIDER WOULD BE HEARING
PROTECTION, GLOVES AND POSSIBLY A FULL FACE
SHIELD, DEPENDING ON THE NATURE OF THE SERVICE.
A
B
Aftermarket Kit #362881
Letter
PN
Description
Qty
A
362882
Enclosure Door
1
B
362883
Nozzle Enclosure
1
