3
574-537-8900
Rev: 11.11.20
Waste Master
®
Tubular
Storage Enclosure
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002186
Mounting Options
The enclosure can be mounted in either a vertical
(Fig.1A)
or horizontal position
(Fig. 1B)
. Additionally, it can be
installed underneath the RV or inside of a compartment.
Installation
Enclosure and Door Frame Assembly
1.
Locate spring latch on the interior side of the enclosure door
(Fig.3)
.
Fig.1
Fig.2
spring latch
A
B
11”
5
1/4
”
cut out
area
Fig.3
2.
Insert the spring latch through the hole in the lower left
corner of the enclosure
(Fig.4)
.
Fig.4
NOTE:
A rectangular opening of 11” x 5
1/4
” will need to be
made
(Fig.2)
.
NOTE:
Consult the manufacturers manuals or qualified
service technician to determine the best location for
installation.
NOTE:
Strapping or cable ties may be used to secure or
support the storage tube once the system is installed.
Fig.5
3.
Line up door frame with enclosure and snap on the door
(Fig.5A)
.
A
