10
432-LIPPERT (432-547-7378)
Rev:06.30.22
JT’s Strong Arm
™
Travel Trailer
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-002345
Operation
Scissor Jack Extend
1.
Level your trailer side-to-side.
2.
Lower the front of the trailer 3/4” lower than the rear.
3.
Lower and set rear jacks evenly.
4.
Tighten the T-Bolts on the two rear Strong Arm
Jack Stabilizers.
5.
Raise the front of the trailer to make it level front-
to-back.
6.
Tighten T-Bolts on the four front Strong Arm
Jack Stabilizers.
5.
Raise the front of the trailer to make it level front-
to-back.
6.
Tighten T-Bolts on the four front Strong Arm
Jack Stabilizers.
Electric Stabilizer, Jack Extend
1.
Level your trailer side-to-side.
2.
Lower the front of the trailer 3/4” lower than the rear.
3.
Lower and set rear jacks evenly.
4.
Tighten the T-Bolts on the two rear Strong Arm
Jack Stabilizers.
5.
Raise the front of the trailer to make it level front-
to-back.
6.
Tighten T-Bolts on the four front Strong Arm
Jack Stabilizers.
7.
Briefly press the electric jack switch so the jacks
slightly lift the front of the trailer. This eliminates the
play (movement) at the bolts and bolt holes between the
stabilizers and the trailer.
Scissor Jack Retract
1.
Level your trailer side-to-side.
2.
Lower the front of the trailer 3/4” lower than the rear.
3.
Lower and set rear jacks evenly.
4.
Tighten the T-Bolts on the two rear Strong Arm
Jack Stabilizers.
