background image

2

lippert.com 

    432-LIPPERT (432-547-7378)    

 

Rev: 03.31.22

On-the-Go

 12.5 Foot Ladder 

(Designed for use with the  
On-the-Go

 Prepped Receiver) 

 

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004372

On-the-Go

On-the-Go

 Ladder Prepped Kit —2021097938

 Ladder Prepped Kit —2021097938

Letter

Letter

PN

PN

Description

Description

Qty

Qty

A

2021097937 12.5 ft Ladder assembly with 

attached mounting hanger and 

warning labels

1

Introduction

The On-the-Go Ladder is a fully-adjustable and collapsible 

ladder with safety locks at each rung for extra security. The 

Ladder is designed to be used only with the OEM-installed 

On-the-Go Receiver. 
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the LippertNOW app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the LippertNOW app.

The LippertNOW app is available for free on the Apple App 

Store

®

 for iPhone

®

 and iPad

®

 and also on Google Play

 for 

Android

 users.

Apple App Store

®

, iPhone

®

, and iPad

®

 are registered 

trademarks of Apple Inc.
Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and fully understand all instructions before installing 

or operating this product.
Adhere to all safety labels. 

Parts List

NOTE: 

Part numbers are shown for identification purposes 

only. Not all parts are available for individual sale. All parts 

with a link to the Lippert Store can be purchased.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT

AN INSTALLATION PROCEDURE HAS A SAFETY

RISK INVOLVED AND MAY CAUSE DEATH, SERIOUS

PERSONAL INJURY, SEVERE PRODUCT AND/OR

PROPERTY DAMAGE IF NOT PERFORMED SAFELY

AND WITHIN THE PARAMETERS SET FORTH IN THIS

MANUAL.

THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT A

PROCEDURE HAS A SAFETY RISK INVOLVED AND

MAY CAUSE PERSONAL INJURY, PRODUCT AND/OR

PROPERTY DAMAGE IF NOT PERFORMED SAFELY

AND WITHIN THE PARAMETERS SET FORTH IN THIS

MANUAL.

THE “DANGER” SYMBOL ABOVE IS A SIGN THAT

IMPROPER OPERATION HAS A SAFETY RISK 

INVOLVED AND MAY CAUSE DEATH, SERIOUS

PERSONAL INJURY, SEVERE PRODUCT AND/OR

PROPERTY DAMAGE IF NOT PERFORMED SAFELY

AND WITHIN THE PARAMETERS SET FORTH IN THIS

MANUAL.

 A

Summary of Contents for On-the-Go 2021097938









Reviews: