Rev: 06.29.22
Page 11
CCD-0004431
Fig. 18
A
A
Final Adjustment of the Transport Lock Latching Mechanism
1.
Lift up SolidStep Levitate to its stored position (Fig. 18). Make sure the latching mechanism flanges
(Figs. 18A, 19A and 20A) are resting against the door frame. If final adjustment is required, loosen the
two bolts (Fig. 19B and Fig. 20B) on either side of the adjustable latching mechanism for side-to-side
adjustments.
Prior to using the transport lock, the latching mechanism may need to be adjusted to the proper
left-right orientation and tightened in position. Attempting to engage the transport lock without
proper adjustment may cause damage to the doorframe or step assembly.
Fig. 19
B
A
Fig. 20
A
B
B
B
