background image

2              

lippert.com 

    432-LIPPERT (432-547-7378)   

Rev: 06.15.22

SureShade

® 

Power 

Bimini Upgrades: Fly 

Extension

Installation and Owner’s Manual

(For Aftermarket Applications)

CCD-0004538

Introduction

Protection from the elements while spending time on your 

pontoon makes for a great day. Our bimini extension kit 

easily connects to our canopies with the front, zippered 

storage pocket. This nylon bimini extension protects 

against harsh UV rays and rain.
The bimini extension kit is also easily customizable for 

use towards the rear of the boat, running underneath 

the canopy to provide additional protection when and 

where needed.
Additional information about this product can be obtained 

fro

lci1.com/support

 or by using the LippertNOW app. 

Replacement kits can be ordered from 

https://store.lci1.

com/

 or by using the LippertNOW app.

The myLCI app is available for free on Apple App Store

®

 

for iPhone

®

 and iPad

®

 and also on Google Play

 for 

Android

 users.

App Store

®

 and iPad

®

 are registered trademarks of 

Apple Inc.
Google Play

 and Android

 are trademarks of Google Inc.

Safety

Read and understand all instructions before installing or 

operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables 

can change the circumstances of the instructions, i.e., 

the degree of difficulty, operation and ability of the 

individual performing the instructions. This manual 

cannot begin to plot out instructions for every possibility, 

but provides the general instructions, as necessary, for 

effectively interfacing with the device, product or system. 

Failure to correctly follow the provided instructions may 

result in death, serious personal injury, severe product 

and/or property damage, including voiding of the LCI 

limited warranty.

THE “WARNING” SYMBOL ABOVE IS A SIGN THAT 

A PROCEDURE HAS A SAFETY RISK INVOLVED 

AND MAY CAUSE DEATH OR SERIOUS PERSONAL 

INJURY AND/OR SEVERE PRODUCT OR PROPERTY 

DAMAGE IF NOT PERFORMED SAFELY AND WITHIN 

THE PARAMETERS SET FORTH IN THIS MANUAL. 

FAILURE TO FOLLOW INSTRUCTIONS PROVIDED 

IN THIS MANUAL MAY RESULT IN DEATH, SERIOUS 

PERSONAL INJURY AND/OR SEVERE PRODUCT AND 

PROPERTY DAMAGE, INCLUDING VOIDING OF THE 

COMPONENT WARRANTY.

DO NOT FULLY OPEN THE BIMINI FRAME WITHOUT 

THE CANVAS TOP INSTALLED. OPENING THE BIMINI 

FRAME WITHOUT THE CANVAS TOP INSTALLED 

WILL RESULT IN SEVERE PRODUCT DAMAGE. ONLY 

FULLY OPEN THE BIMINI FRAME WITH THE CANVAS 

TOP INSTALLED.

THE “CAUTION” SYMBOL ABOVE IS A SIGN THAT 

A SAFETY RISK IS INVOLVED AND MAY CAUSE 

PERSONAL INJURY AND/OR PRODUCT OR 

PROPERTY DAMAGE IF NOT SAFELY ADHERED TO 

AND WITHIN THE PARAMETERS SET FORTH

IN THIS MANUAL.

ALWAYS WEAR EYE PROTECTION WHEN 

PERFORMING SERVICE, MAINTENANCE OR 

INSTALLATION PROCEDURES. 

DO NOT EXCEED 15 MPH WHEN FLY EXTENSION IS 

DEPLOYED. EXCEEDING MAXIMUM SPEED LIMIT 

WITH FLY EXTENSION DEPLOYED CAN CAUSE 

DAMAGE TO THE EXTENSION AND VOID PRODUCT 

WARRANTY. 

Summary of Contents for SureShade Power Bimini 2021013744













Reviews: