• WARNING: To avoid any risk, due to instability, the appliance must be secured
in accordance with these instructions.
C
limAte
ClAss
Only install the appliance in a location where the room temperature matches the
climate class for which it was designed
(see table below).
The climate class is on the rating plate located on the outside of the appliance.
The table below shows the correct room temperature for each climate class:
Climate class
Room temperature
SN
+10 to +32°C
N
+16 to +32°C
ST
+16 to +38°C
T
+16 to +43°C
Your RDL 130-50b4 refrigerator/freezer is rated “
N/ST
”. If the room temperature is
below or above the indicated room temperature, the performance of your refrigerator/
freezer may be affected, and your food may spoil.
s
uffiCient
ventilAtion
•
Make sure that air can always circulate freely around the appliance.
•
For the appliance to run properly, do not obstruct the vents and leave a space of
at least 20 cm above the device, 10 cm between the back and the wall and 2 cm
on each side.
•
If your appliance is to be installed next to another refrigerator or freezer, make
sure the appliances are not touching each other. This is to prevent condensation
from forming on the outside.
l
evelling
For vibration-free operation, the appliance needs to be in a level
position. To do this, adjust the adjustable feet at the front to properly
level the appliance.
r
eversing
the
direCtion
thAt
the
doors
open
You can change the opening direction of your refrigerator/freezer doors if necessary
(compared to the original opening direction from left to right). To make these changes,
remove all door shelves and follow the steps indicated below or contact a qualified
professional.
EN
21
V.1.0
Summary of Contents for RDL 130-50b4
Page 2: ...1 2 3 4 5 6 7 8 9 V 1 0 2...
Page 85: ......
