6.
Place the freezer door on a soft surface to avoid damaging it.
7.
Remove the 2 screws from the middle
hinge using the 8 mm spanner or Phillips
screwdriver (Figure C).
8.
Lift the refrigerator door off the lower hinge.
9.
Just like for the freezer door, swap the stud
and the cap.
10.
Turn the refrigerator door upside down.
Move the plastic pivot from the right to the left using the Phillips screwdriver.
11.
Tilt the appliance backwards, making sure it is stable.
12.
Using the 8 mm socket or the Phillips screwdriver, remove the 2 screws supporting
the lower right-hand hinge and refit it on the left.
13.
Move the locking screw from the right-hand hole to the left-hand hole on the
lower hinge by unscrewing it (Fig. D).
14.
Return the appliance to its upright position.
15.
Remove the 2 pins and the cap securing the middle hinge on the right side (using
a flat screwdriver) and transfer them to the left side (Fig. E).
16.
Using a Phillips screwdriver, remove the top left hinge cover and refit it on the
right.
17.
Reposition the refrigerator door on the lower hinge pin.
F
igure
C
F
igure
D
F
igure
e
EN
23
V.1.0
Summary of Contents for RDL 130-50b4
Page 2: ...1 2 3 4 5 6 7 8 9 V 1 0 2...
Page 85: ......
