UNPACKING
•
Remove the shipping box.
•
Check that the appliance has not been damaged during transport. Do not plug in a
damaged appliance under any circumstances! If the appliance is damaged, please
contact your retailer.
•
Remove all tape and packaging materials on the inside and outside of the appliance.
Take out any the accessories (ice cube tray, etc.) that may have been supplied with
the appliance.
b
efore
first
use
•
Clean the inside of the appliance and any accessories provided with lukewarm
water with a little white wine vinegar added to it. Do not use soap or detergent as
the odour may persist. After cleaning, dry the appliance completely.
•
You can use
white spirit to remove any adhesive remaining on the outside of the
appliance.
To clean the appliance, always turn it off and unplug it, or remove the fuses or
turn off the circuit breaker.
INSTALLATION
i
nstaLLation
LoCation
•
Place your refrigerator on a stable, level surface.
•
The appliance must be installed in a dry, well-ventilated room at room temperature.
Make sure to leave a space of at least 10 cm around the appliance.
•
The appliance must not be exposed to direct sunlight.
•
The appliance must not be exposed to rain.
•
The appliance must not be installed next to a radiator, a stove or any other heat
source.
•
The appliance’s energy consumption and efficient operation are affected by the
room temperature.
•
The appliance must be installed in such a way that the outlet is accessible.
•
Make sure after installing it that it is not resting on its power cord.
• Before plugging the appliance in to the
electrical outlet for the first time, please let the
appliance rest for two hours if the appliance was
V.1.0
18
