page >>
8
LBL000097A
LightForce FX User Manual, DCN: O
FX
Caution
ALWAYS Turn the device off before lifting, moving or relocating the device.
Caution
DO NOT allow any nonessential personnel into the treatment area during any laser procedure.
Caution
DO NOT press the finger/foot switch without first verifying the safe orientation and proper positioning
of the hand piece and distal end of the optical fiber and ensuring compliance to all safety precautions.
Caution
NEVER allow untrained personnel to operate this device unless directly supervised by a properly
trained and experienced individual.
Caution
ALWAYS clean the SMA fiber tip before inserting into the SMA emission port. A dirty tip could result in
damage to the device.
3.6 Fire and Explosion Hazards
Health care professionals should be aware of the following safety considerations and potential fire
hazards when using the laser:
1. The laser beam can ignite most nonmetallic materials.
2. A UL-approved or equivalent fire extinguisher should be readily available.
This laser unit is not intended for operation in areas subject to explosion hazards such as flammable
materials, gases or substances. A fire or explosion could occur.