page >>
25
LBL000097A
LightForce FX User Manual, DCN: O
FX
9.1 Finger Switch
A single intensity finger switch comes with the hand piece. The laser device treats the finger
switch as a simple on/ off device. When Override function is off, pressing down the finger switch
produces 100 % of the laser energy set by the operator. Fully releasing the pressed finger switch
stops laser emission. When Override function is on (not for normal operation), pressing down the
finger switch one time produces 100 % of the laser energy set by the operator, and pressing again
stops the laser emission.
9.2 Foot Switch
An optional single intensity foot switch can be purchased for this laser device. The laser device
treats the foot switch as a simple on/ off device. Fully releasing the pressed foot switch stops laser
emission.
When closed, the cover of the foot switch is designed to prevent inadvertent foot pedal control
surface depression. Always turn the laser off when not in use.
When foot switch operation is desired, press down on the cover then release. The cover is spring-
loaded and will open automatically.
9.3 AC Power Cord
9.4 Power Adapter
9.5 Laser Safety Eyewear
9
>>
Accessories
Caution
ALWAYS wear the protective eyewear supplied with this device, which is optically dense at the
wavelength of operation (see specification sheet). All personnel present during device operation
must wear this eyewear. Contact LiteCure® at 302.709.0408 (for US and Canada) to purchase
additional sets of protective eyewear for this device.
All personnel who are within the NOHD are considered to be within the controlled area and must
wear laser safety eyewear. ALWAYS wear the protective eyewear supplied with this device. All
personnel present during device operation must wear this eyewear.