page >>
27
LBL000097A
LightForce FX User Manual, DCN: O
FX
Recommendation
DO NOT use anything to clean the lens inside the hand piece. Doing so may damage the lens during
laser emission.
1. To clean the exterior surfaces on hand piece heads:
Wipe with a soft cloth moistened with isopropyl alcohol solution. Ensure the solution is only
70 % alcohol or less, as solutions of more than 70 % alcohol can cause product damage.
2. To clean the Large Ball:
The Large Ball can be disassembled for cleaning.
•
Before cleaning, turn off the system and unplug the power cord
from the wall outlet.
•
Avoid using soiled or gritty cloths.
•
Remove the elastic band from the hand piece head.
•
Unscrew the top portion of the Large Ball (take care to retain the
spacer ring).
•
The ball can now be removed from the housing unit for cleaning.
•
Always dampen the cloth before cleaning.
•
After cleaning, ensure that all cleansers have been removed and the parts
are dry before re-assembly and use.
3. After cleaning the hand piece head, wipe it dry with a soft cloth. Then leave it on a clean
surface to dry. To expedite drying time of the hand piece head, you may wipe hand piece
head with a solution 70 % (or less) isopropyl alcohol.