8
QUICK START GUIDE
(CONT.)
Quick, step-by-step guide to get your LiteMat up and running.
© LITEGEAR INC. 2015
www.litegear.com
5. Attaching the Center Mount
Start by aligning the guide-pin to the center hole on your LiteMat. Next, while holding the center mount at an
“8 o’clock” position, align it with the holes on your LiteMat and rotate clockwise until you hear the click.
6. Hanging LiteMat
Begin by unscrewing the T-handle on the 5/8 in.
(16 mm) Baby pin receiver on the Center Mount
attached to the LiteMat. Insert the 5/8-in. (16
mm) Baby pin from the clamp/mount into the
pin receiver on the Center Mount. Next, attach
a safety cable or mason line to the overhead
support and then through the provided safety
loop on the LiteMat. Continue by providing
electrical connections to the LiteDimmer and
power supply.
Great care must be taken when mounting
overhead. Hanging a LiteMat should be attempted
by professionals only.
