23
12.Press [
][
] to select the “ ” icon and
then press [ENTER] to exit the “Timer-Record”
menu.
If you wish to delete a timer record item, press [
] [
] [
]
[
] to move to the “ ” icon and press [ENTER]. The item
is deleted.
13.Press [POWER] to turn off the unit and
activate the timer record function.
Note:
1. Make sure that a recordable disc media or a VHS tape is
inserted or loaded for recording before the scheduled time comes.
2. Check the status column to see the recording failure analysis:
OK
-
The event is programmed and ready to record.
Error
- There is a problem with the event settings. Change the
settings until the Status is “OK.”
Done
- The event recorded successfully.
Fail
-
The event failed to record. Move the cursor to the Status
column to view the cause of the error (“No Disc,” “Media
Defect,” “Disc Full,” and etc. ).
Timer Record
Recording TV programs using the VCR Plus+
®
system
1.Press [ POWER] to turn the unit on.
2.Make sure that a recordable disc or a VHS tape
is inserted or loaded for recording.
When you insert a new recordable disc for recording, the recorder
will automatically start the disc preparation process.
When you insert a recordable CD-R or CD-RW disc for recording,
select a disc format for the unit to prepare the disc as (Audio CD,
VCD or SVCD).
3.Press [TIMER] to display the “Timer-Record”
menu.
4.Press [
][
] to select one of the timer setting
list and press [
].
5.Press [
] [
] to move to the disc/tape icon and
press [ENTER] to select to record on a disc or a
tape.
6.Press [
] [
] to select “Mode” and press
[ENTER] .
Press [
] [
] to select among “Once,” “Weekly” or “Daily” and
press [
] to select “VCR Plus+” to press [ENTER].
Mode: Once <-> Weekly <-> Daily
The column for your to enter the PlusCode is displayed.
7.Press the numbered buttons (0, 1~9) to enter
the PlusCode number and press [ENTER].
