26
Note
• After you insert channel(s), numbers of other
channels will change accordingly.
Swapping TV Channels
1
Press
to select a channel from the list,
then press
ENTER
.
2
Press
to select ‘Swap’, then press
ENTER
.
Starteww wwwwwwwd_Advanced_02_06
3
Press
or the number buttons to enter
the channel number, then press
ENTER
.
Started_Advanced_02_07
The channel will be swapped to the designated location.
4
To swap other TV channels, repeat steps 1-3 to
complete the settings.
Renaming TV Channels
This DVD recorder offers an on-screen input
keypad for users to complete the naming/renaming
process. Please press
and
ENTER
buttons on your remote control to select your
desired letters, numbers or punctuation marks. For
more information about how to use the keypad,
please see the section
‘On-Screen Input Keypad’
.
1
Press
to select a channel from the list,
then press
ENTER
.
2
Press
to select ‘Rename’, then press
ENTER
.
Started_Advanced_02_08
The keypad screen will be displayed.
3
Press
to select desired characters
from the keypad, then press
ENTER
after each
entry.
4
When completed, press
to select
‘Finish’, then press
ENTER
.
Note
• You can enter up to 10 characters for a name.
Enabling/Disabling TV
Channels
The automatic scanning process will list all the
available channels for your reference. You can
further edit this list by activating the ‘Enable/Dis-
able’ function, which allows you to temporarily
remove unwanted channel(s) from the list or add
the previously disabled channel(s) back to the list.
1
Press
to select a TV channel which
you would like to switch on/off, then press
ENTER
.
2
Press
to select ‘Enable’ or ‘Disable’, then
press
ENTER
.
