49
Recor
ding
Recording from DV
(Digital Camcorder)
Important
• The DV-Link INPUT jack on this recorder is for
use with DV-compatible camcorders only.
• Only DV signals can be input to the DV-Link
jack on this DVD recorder.
• Do not connect a MICRO MV format video
camcorder to the DV-Link jack.
• Despite the technology endeavour with which
this DVD recorder is built, it is still likely that
your DV may not be fully supported by the
recorder. If you still experince problem using the
DV-Link for recording, please connect your DV
via S-Video or composite cables to this DVD
recorder.
Before you start...
1.
Check whether the DV is correctly connected
to the inputs of this recorder.
Camcoder
DV OUT
DV / Link
DV-Link
IEEE 1394
Recording with ‘Rec Link’
The ‘Rec Link’ feature allows you to easily record
materials from DV with the recorder’s remote
control. This function is automatically activated
when you connect your DV to the DVD recorder.
1
Press
SETUP
to display the Setup menu.
Press
to select ‘Recording’, then press
to enter the sub-menu.
Press
to select a recording mode, then
press
ENTER
.
Guide to Recording Options (p.97)
2
When completed, press
SETUP
to exit the
Setup menu.
3
Press
SOURCE
repeatedly to select ‘DV’ as
the signal source.
Recording_02_05
The control pad will be displayed with the ‘Rec Link’ feature
enabled.
4
Press
HDD/DVD
to select your target medium.
If you would like to record on disc, press
OPEN/CLOSE
to open the disc tray, and place
a recordable disc in the tray. Press
OPEN/
CLOSE
again to close the tray.
5
Press
RECORD
to start recording.
6
Press
STOP
to stop recording.
Recording without ‘Rec
Link’
1
Press
SETUP
to display the Setup menu.
Press
to select ‘Recording’, then press
to enter the sub-menu.
Press
to select a recording mode, then
press
ENTER
.
Guide to Recording Options (p.97)
2
When completed, press
SETUP
to exit the
Setup menu.
3
Press
SOURCE
repeatedly to select ‘DV’ as
the signal source.
4
Press
to select ‘Rec Link’ button on
the screen, then press
ENTER
to switch off the
function.
After switching off the function, you can control your DV
either through the on-screen control pad using
and
ENTER
buttons, or through the control keys on DV.
