NA121
Motherboard
14
Jumper Introduction
cont….
Clear CMOS (Optional)
This jumper allows you to clear the content of the CMOS.
Reference:
JP4
Connector Type:
1 x 3
JP4
Description
Jumper Placement
1-2
Normal (Default)
Put the jumper cover on pin1 and pin2.
2-3
Clear content of CMOS
Put the jumper cover on pin2 and pin3.
Onboard LAN
This jumper allows you to set Onboard LAN feature.
Reference:
JP1
Connector Type:
1 x 3
JP1
Description
Jumper Placement
1-2
Enable
Put the jumper cover on pin1 and pin2.
2-3
BIOS Setting (Default)
Put the jumper cover on pin2 and pin3.
OPEN
Disable
Remove jumper from JP1.