page 7
10. Light Kit Assembly (Optional).
Remove 3 screws and star washers from switch
housing cap at top of light kit fitter.
If you wish to use your fan WITH the light kit
,
remove finial, finial plate, hex nut and rubber
washer from bottom of light kit fitter.
Save finial,
finial plate, hex nut and rubber washer for later use.
Locate
BLUE
and
WHITE
wires in the switch
housing labeled FOR LIGHT KIT CONNECTION.
Remove and discard cardboard label and plastic
that hold these 2 wires together.
Connect
WHITE
wire from switch housing to
WHITE
wire from light kit fitter. Connect
BLUE
wire
from switch housing to
BLACK
wire from light kit
fitter. Be sure molex connections snap together
securely.
Align holes in switch housing cap with holes in
switch housing and attach light kit fitter to switch
housing with 3 screws previously removed. (
Note
:
The gap on the top edge of the switch housing cap
must align with the reverse switch on the switch
housing for proper fit.) Secure all 3 screws with a
Phillips screwdriver.
["Light Kit Assembly" continued on next page.]
9. Blade Assembly.
WARNING
: To reduce the risk of serious bodily
injury,
DO NOT use power tools to assemble the
blades. If overtightened, blades may crack and break.
Time Saver:
Washers for blade screws can be set on
each blade screw prior to installing blades.
Locate 15 blade attachment screws and washers in
one of the hardware packs. Hold blade arm up to
blade and align holes. Insert 3 blade attachment
screws (along with washers) with fingers first, and
then tighten screws securely with a Phillips
screwdriver. Repeat procedure for remaining blades.
Remove blade arm screws and lock washers from
underside of motor (save blade arm screws and lock
washers to secure blade arms). Align blade arm holes
with motor screw holes and attach blade arm with
lock washers and blade arm screws. Before securing
screws permanently, repeat this procedure with
remaining blade arms. Secure all screws.
Note
: Tighten blade arm screws twice a year.
switch housing
molex connections
light kit fitter
switch housing
cap
blade arm screws
lock washers
motor housing
blade arm
blade
blade attachment
screws and washers
