8. Blade Assembly.
7. Canopy Assembly.
Locate 1 rubber cushion at the top of the
motor housing. Remove the 2 larger screws
and washers but leave rubber cushion intact.
Note
: Do
not
remove center screw.
Lower blade over rubber cushion and attach
with screws and washers that were
previously removed. Tighten screws securely.
Repeat with the remaining blades.
Lift canopy over hanging bracket until it touches
the ceiling. Tighten the canopy set screw to secure
canopy.
page 6
blade
canopy set screw
canopy
motor
housing
