2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E
12
NOTE: the following pictures dictate the factory recommended brake line and cable
routing
.
9.
Connect the handlebar harness, and all other connectors, by aligning the alignment
arrows stamped on each connector. (RED TO RED, YELLOW TO YELLOW, BLACK
TO BLACK) Double-check all connections starting from the motor controller, under
battery tray, and following each electrical cable.
NOTE: CONNECTOR PINS ARE VERY SENSITIVE. LINE UP ARROWS ON
MALE AND FEMALE CONECTORS TO ENSURE YOU DO NOT
BREAK/DAMAGE PINS.