2862 Walnut Avenue, Suite D - Tustin, CA, 92780
Phone: 1.949.313.6340 • E
14
5
.
Operating Your Super73
1. INSERT THE BATTERY
A. Make sure the battery is fully charged (the LED on the charger should be green).
B. With one hand on the frame, use the other hand to slide the battery horizontally onto the
battery tray on the frame. Push it all the way in until it clicks.
C. Lock it in place with the provided key to prevent it from sliding out. Check the battery is
secure.
D. Make sure the safety power switch on the underside of the battery is on (on the “1”
side). For information on how to charge the battery, see page 6.
2. POWER-ON THE DISPLAY
Disengage Kickstand (
Do Not sit on the bike with the
kickstand engaged
) Seat yourself on the Super 73. Turn on the display panel by holding
down the power button for a few seconds (1-3 seconds). Make sure the battery switch is on.
The thumb display screen will light up. The throttle is now live.
3. SET YOUR LEVEL OF PEDAL ASSIST
To select your level of pedal assist, press on
the “M” button on your display. You have 3 levels of pedal assist.
Basic overview of pedal assist settings:
ASSIST 0 - No pedal assist.
ASSIST 1 - 50% of speed power - ECO
ASSIST 2 – 75% of speed power - MED
ASSIST 3 - 100% of speed power - HIGH
The higher the level, the more electric assistance you’ll get, and the less you’ll have to
pedal.
4. TURNING ON THE LIGHTS
To turn on your headlight and rear lights tap the power
button once. Do the same to turn off.
5. TURNING OFF YOU
BIKE
When you are done riding your Super73 it is important to
turn off the power properly.
A. Turn off the display by holding down the power button for 1-3 seconds
B. Turn off the battery by pressing the switch beneath the battery, should be on the “0”
side.
