Toll Free: 877-250-7729 www.Litter-Robot.com
29
Safety Features
Cat Re-Entry Protection Mode
If the Cat Sensor detects that your cat is trying to enter
the Litter-Robot during a cleaning cycle the Globe will
stop rotating. The Litter-Robot then waits for 15
seconds before attempting to resume the clean cycle.
Anti-Pinch Safety Feature
The Litter-Robot comes equipped with an anti-pinch
feature to make the Litter-Robot extra safe for your cat.
If a potential pinch condition is detected, the Globe
automatically stops and then reverses direction for
approximately 2 seconds.
Anti Pinch Line – Do Not Attempt to Remove
Toll Free: 877-250-7729 www.Litter-Robot.com
30
Internal Guard
The Litter-Robot Globe has an Internal Guard that
covers the waste ports. The purpose of the Internal
Guard is to prevent cats from entering the Globe
through the waste ports. It also prevents litter from
getting kicked out.
During the cleaning cycle, just before the Globe reaches
the “dump” position, a mechanism moves the Internal
Guard out of the way to open the waste ports. When
the Litter-Robot Globe starts rotating back to the home
position, the Internal Guard automatically closes,
covering the waste ports again.
Automatic Shut-Off
If the Globe becomes jammed, the motor will stop and
all three lights on the Control Panel will start blinking at
a rate of twice per second. To reset the unit, follow
these steps:
1.
Turn off unit and unplug the power cord
2.
Remove the obstruction
3.
Reposition the Globe in the home position
4.
Plug the power cord back in and turn on. The Litter-
Robot will perform an initialization cycle. Please
keep in mind that the Cat Re-entry Protection is
active during the initialization.
If this condition persists, please call Customer Service,
toll-free, at 1-877-250-7729.
