Pre-Cut Colonial Williamsburg/Pinehurst Garden Shed
ASSemBly InStruCtIOn mAnuAl
© 2018 Little Cottage Co.
2
Assembly Instruction manual
5.
Locate 2x4’s for wall and layout wall as shown.
6.
Fasten the wall with 3” nails as shown.
1.
thank you for purchasing from little Cottage Company!
If you have any questions during construction please call us
at 330-893-4212 To begin construction of your new building,
first you will want to locate your accessory components, as shown
above.
2.
Once your site is ready you may begin
construction of your floor by laying out your
4x4 runners. You will want to place one runner
every 2 feet. These instructions will apply to
a floor kit purchased from our company or if
you purchased materials yourself.
3.
Now place 2x4’s, 16 inches on center, on top of the
4x4’s, place 2 1/2” screws in each of the 4 corners.
Measure from corner to corner to make sure it is square.
Now you can fasten each 2x4 to the 4x4’s with 2 1/2”
screws.
4.
Next set sheet in place and make sure sheeting is flush
on both sides. Secure in place by driving 1 1/4” screws
through the sheeting into the 2x4’s every 8 inches.
rake
truss
truss
rake
Window Box
& Brackets
transom
Window
Gussets
Gable Vent
Shutters
Corners
Siding underneath Door
Vent Frame
Door
latch
