Pre-Cut Colonial Williamsburg/Pinehurst Garden Shed
ASSemBly InStruCtIOn mAnuAl
© 2018 Little Cottage Co.
9
Assembly Instruction manual
43.
Now take your truss gusset, set in place and fasten
with 8 of the 1 1/4” black headed screws. Repeat on the
reverse side.
44.
Locate the first wall panel, then set in place. Make
sure the wall is flush with the edge of the floor structure,
by using an angle. Apply pressure from the outside and
secure the wall panel to the floor using 2 1/2” screw.
45.
Position next panel in place and fasten to sheeting
along the bottom with 2 1/2” screws to completely secure
the wall panel to the floor. Place 2 1/2” screws 16 inches
on center.
46.
Now that the gable is assembled carefully lift into
place.
See step #49 for optional transom window gable
installation.
47.
Position the gable measuring 7 1/4” from the inside of
the wall to the end of the gable. Then secure with 2 /12”
screws at the X’s.
48.
Now make sure that the gable is flush with the wall.
7 1/2”