Fit the mattress bases
60 x wood screws
Spread out both mattress bases onto both the upper and lower bed frame,
ensuring that the end slats are tight up to the bed ends. Screw down each bed
slat.
2 x
Make the bunk
Two people
8 x 3.5cm bolts and 4 x double dowels and an allen key.
Fit 4 x double dowels into the top of the legs on the lower bed, insert 4 x 3.5cm
bolts (do not tighten)
Now lift the upper bunk onto the lower bunk, aligning the double dowels. Now
insert the remaining 4 bolts, once engaged, tighten ALL 8 bolts. (some wiggling of
the lower attached bolt can help align the upper bolts)
8
x Bolts 3.5cm
Summary of Contents for BBD001
Page 1: ...Code BBD001 ...
