Make the
ladder
You need:
8 x 6cm bolts, 8 x barrel nuts and 16 dowels
insert 4 x dowels into each tread
Orientate the ladder pieces so they are opposite each other and with the holes
facing upwards. Now press a tread into each pair of holes, matching the front
edges. Once all treads are engaged and the ladder formed, insert a barrel nut
into the tread hole, slip a 6cm bolt fom the outside,
rotating
into the barrel nut
hole, repeating on the remaining holes. Tighten all fixings to make the ladder.
4
x
Fit the ladder hooks
You need:
4 x bolts 1.8cm, 2 x ladder hooks and 2 x pads
Orientate the 2 x hooks on the ladder and connect using the 4 x 1.8cm bolts. Now
stick a pad onto the inside of the hook, this will protect the paintwork on your bed.
4
x
Summary of Contents for BBD001
Page 1: ...Code BBD001 ...
