x 2
x 2
Fixing the supports
You need: 8 x 3cm bolts and an allen key
Orientate the supports with the step sitting on the mattress rails and on the inside of
the bed. Now connect each support to the bed using the bolts.
Connecting the rear safety panel
You need: 4 x 3cm bolts, 4 x sleeve nuts, 4 x long bolts and 4 x barrel nuts
Please use two people to complete this assembly
Lift the rear safety panel into place, resting in up against the support rails fitted in
the prevoius step. Now insert 4 long bolts into the panel end through the bed legs
and connecting to 4 x barrel nuts. Now insert the 4 x 3cm bolts through the 4 x
holes in the panel with the sleeve nut fitted to the support rail. Tighten both bolt
and sleeve nut using two allen keys.
Note = you can assemble the safety panel with the barrel nuts facing either inside
or outside of the bed
.
x 2
x 2
