Fix the ladder hooks to the ladder
You need: 4 x 2.5cm wood screws, 2 x ladder hooks and 2 x expanding bolts.
Fit both ladder hooks to the ladder by screwing the hooks to the ladder using the
pilot holes provided. Note orientation of the hook as shown
Insert 2 x expanding bolts into the un-used leg holes at the bed entrance, tigthening
both parts to ensure a secure fit.
Fix the ladder to the bed
You need: 1 x Small wood screw 1.5cm
Place the ladder into the bed entrance (note that the upper bed laths are not
fixed down)
The ladder hook should be connected to the mattress side rail using the small
wood screw only on the ladder string furthest away from the bed end.
You might need to lift the fourth mattress bed lath up in order to fix this ladder
screw. Pushing the mattress laths backwards in order to allow the ladder brackets
into the gap (It is meant to be a snug fit)
Once the ladder is secure screw down the four remaining mattress laths making
sure that the last bed lath is tight to the bed ends.
x 2
