Building the LOWER bed frame (Two people)
4 x 9cm bolts and 4 x barrel nuts
Build the bed with the parts positioned as shown, Locating the wooden dowels
into the holes on the two upper bed ends. Insert a barrel nut into the hole at
each end of the rails, allowing it to connect to a long bolt fitted from the outside,
rotate to tighten the bed frame
Align
Tighten
2 X LOWER bed ends
x 34
x 34
Fix the mattress bases (Two people)
68 x wood screws
Gently lay the each mattress base out onto the support rails fitted to the inside of
the bed. Stretch the bases out so that the end slats are tight to the bed end
frames. Now screw down every mattress slat making sure the bed remains
parallel. Note; Upper bed = do not fix the last four bed slats on the end you
intend to fit the ladder.
x 34
Upper Bunk
Upper Bunk
Lower Bunk
