X 12
X 8
Fit the sides
12 x dowels, 8 x large cam pins and 4 x feet
Screw the cam pins into the smaller holes on each side. Insert the wooden dowels
into the holes on the sides and top edges as shown. Now insert the feet into the
holes at the bottom of each side.
Assemble the unit
8 x large cams, 2 x dowels and 2 x large cams
Fit the dowels and cam pins, connecting the plinth to the base.
Align the plinth, base, back and rear brace as shown. Engage the fixings and push
the parts together to create a box like carcass. Now insert the large cams into the
cam pin holes, rotate to tighten the carcass together.
x 4
X 2
X 2
