Fitting the bed legs.
4 threaded bars and 8 wooden dowels
Insert and rotate each threaded bar into the centre hole on each bed leg. Now insert the
wooden dowels into the two holes either side.
Fix the base
30 x Wood screws
Lift the slatted base onto the
bed, slide out and screw down.
Note: Both bed end slats should
be tightly fitted at each end.
Making the bed. (Two people required)
Slide each mattress rail onto the threaded bar and
wooden dowels that you have fitted in the legs. Carefully
slide the lunar washer onto the threaded bar as it passes
through the large hole in each mattress rail. As this bar
passes through the lunar washer slip on the spring washer
then the normal washer and then finally the nut. Push the
bed frame together. Rotate the nut using the spanner
provided and tighten the bed frame.
X 30
