Making the bed frame. (Two People)
12 x Bolts 6.5cm, 12 x Barrel Nuts, an Allen key and a screwdriver.
Push one barrel nut into each mattress rail hole, aligning the slot head to the end
hole.
Slide each bolt through the bed end holes and into the holes in the end of each
rail.
Twist the bolts to tighten the bed together.
Align
Tighten
front mattress rail
rear mattress rail
front mattress rail
2 x rear rails
front bed leg (with metal inserts)
Making the ladder
At this point you need to decide which side the ladder is fitted (left or right)
4 x Bolts 8cm and an Allen key
Firmly push together the ladder treads into the ladder strings, notch to notch.
Insert 4 x bolts into the holes positioned at the rear of each ladder string, 2 each
side.
Twist the bolts to tighten the ladder together. (Some light movement can help with
engagement)
Ladder RIGHT
Ladder LEFT
