2 x 3.5cm
2 x 4cm
2 x 6.5cm
Fit the front safety panel
2 x Bolts 6.5cm, 2 x barrel nuts and 2 Bolts 4cm an Allen key and screwdriver.
Insert 2 x 6.5cm bolts into the bed leg opposite to the ladder, insert 2 x barrel nuts
into the safety panel (holes on inside face). Now slide on the safety panel and
connect the panel to the long ladder leg using the 4cm bolts and the 6.5cm bolts
for the leg.
Twist the bolts to tighten the ladder to the bed.
Fit the Ladder (Right-hand entrance illustrated)
2 x Bolts 3.5cm, 2 Bolts 4cm an Allen key
Connect the short ladder to the bed leg using the 2 x 3.5cm bolts.
Now connect the long ladder to the mattress rail using 2 x 4cm bolts, inserting from
the inside of the bed frame.
Twist the bolts to tighten the ladder to the bed.
2 x 4cm
