Fit the piece
3 x Bolts 4cm, 2 x Sleeve nuts an 2 Allen keys
Orientate the piece so that the holes line up with the rear rails. Now fit the 2 x
sleeve nuts into the top two rear rails. Use the 3 x 4 cm bolts to fix the piece from
the outside of the bed and into the 2 x sleeve nuts and lower mattress rail (metal
fixing already located in the rail).
Tighten with the 2 Allen keys to lock that parts.
Fix the base
30 x Wood screws and a screwdriver
Lift the slatted base onto the bed, slide out and screw down.
Note: Both end slats should be tight up to each bed end.
X 30
X 2
Now place the bed into position and place your furniture beneath the bed.
