Assembly Instructions
Step
8
Fitting the back rail to the
left end panel.
Put some cardboard
packaging on the ground
to protect the surface.
Place the top panel
on the floor. Lift the
assembly of end panels
and back rail over the
top and align with the
metal and wooden
dowels.
Push into place and use
a screwdriver to turn the
cams clockwise 180° to
lock the metal dowels in
place.
IMPORTANT!
Step
9
Fitting the end panels to
the top.
1785
1785
Position the left end
panel 7 and back
rail as shown
and push the metal
dowels into the cams.
The groove on the left
end panel will align with
the groove on the right
hand end panel .
Using a screwdriver, turn
the cams clockwise 180°
to lock the dowels in
place.
8565
1787
1788
1788
8565
1787
1788
8565
1787
1785
8
2 people required to
lift panels in place.
The reverse side of panel
does not have any
holes.
Groove
