Making the bed frame.
8x Bolts, 8x Barrel Nuts, an Allen key
Push one barrel nut into each mattress rail hole, aligning the slot head to the end hole.
Slide each bolt through the bed end holes and into the holes in the end of each mattress
rail.
Twist the bolts to tighten the bed together.
Fix the base
6 x Wood screws
Lift the slatted base onto the bed,
slide out and screw down.
Note: Both bed end slats should be
tightly fitted at each end.
Fix the base
6 x Wood screws and a screwdriver
Lift the slatted base onto the bed,
slide out and screw down.
Note: Both bed end slats should be
tightly fitted at each end.
X 6
Align
Tighten
