Fit the rear panel
2 x wooden dowels, 4 x 6cm bolts and 4 x barrel nuts
Insert a wooden dowel into the central holes at each end of the rear panel and slide the
panel into place, as shown. Align the two bolt holes seen in each piece of the bed side and
insert the bolts and connecting barrel nuts. Once located, LEAVE LOOSE until the base
boards are fitted.
Fixing the base
12 x Wood screws
Drop the 3 x base boards into the starting at each end with the centre panel being
last to fit. These boards can be a little fiddly to fit and in keeping the rear main
frame loose should help.
x 12 Screws
Now tighten all the frame fittings up to secure the bed.
1
2
3
