background image

2

9

NOTE: Set up as close to power source as possible. The product 

should be periodically examined for potentially unsafe conditions 

such as: damaged cord, plug, housing or parts, and that in the 

event such damage is found, the product should not be used until 

properly repaired. Never leave the blower outside in the rain or 

exposed to the elements when not in use. When in use, do not 

place the cord across traffic areas, water or damp areas. The 

blower should be placed on a stable surface and anchored per 

product instructions. The power cord of the blower is equipped 

with a Ground Faulty Current Interrupter (GFCI) plug. 
1) Make sure that the blower switch is in the “OFF” position. Plug

    the blower into a properly grounded 110-120V GFCI outlet.

2) If the GFCI has been tripped, press the “RESET” button to

    restore power to the blower.

3) Set the power switch of the blower to “ON” to inflate. After use,

    turn the power to “OFF”.

4) To disconnect, have an adult grip it tightly and pull the plug

    from wall outlet.

 

 

  ADULT SET-UP AND SUPERVISION REQUIRED. 

  Use only with Ground Fault Circuit Interrupt (GFCI) receptacle. 

•  This blower is for residential use only. It is not intended to be

   used in commercial or industrial settings.

•  Never insert fingers, pencils or any other object through the grill

   at ANY time.

•  Do not operate blower with a damaged cord or plug, after the

   appliance malfunctions or has been dropped or damaged in any

   manner.

•  Do not operate in the presence of explosive and/or flammable

   fumes.

•  Never connect the blower to any solid - state speed control

   device.

•  To reduce the risk of fire or electric shock, do not use this blower

   with any solid-state speed control device. 

  WARNING - Electronic hazard - Do not use extension cords with 

    this product. 

  Always unplug the blower before servicing. 

  Outdoor use only. 

OPERATED PRODUCT

 

MODEL FJ-28

BLOWER SPECIFICATIONS: 120V (AC), 
60 Hz, 3.5A, 420W 

GROUNDING INSTRUCTIONS FOR ALL GROUNDED, CORD-CONNECTED PRODUCTS

This product should be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by 
providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an ap-
propriate grounding plug. This plug must be plugged into an outlet that is properly installed and grounded in accordance with 
all local codes and ordinances. DANGER - Improper installation of the grounding plug can result in a risk of electric shock. 
If repair or replacement of the cord or plug is necessary, do not connect the grounding wire to either flat blade terminal. The  
wire with insulation having an outer surface that is green, with or without yellow stripes, is the Grounding wire. Check with a 
Qualified electrician or serviceman if the grounding instructions are not completely understood, or if in doubt as to whether 
The product is properly grounded. Do not modify the Plug provided; if it will not fit the outlet, have the Proper outlet installed 
By a qualified electrician. For a grounded, cord-connected product, rated less than 15 amperes and intended for use on a 
Nominal 110-120-volt supply circuit, these instructions should be followed. This product is for use on a nominal 110-120-
volt supply circuit, and has a grounding plug that looks like the plug illustrated in sketch A. Temporary adapters should not 
be used. Do not use product until a properly grounded outlet (sketch A) can be installed by a qualified electrician.        

 

!

  CAUTION: The blower is a high volume blower, and is capable of moving lots of air very quickly. Place the blower in 

an area where it will not suck in dirt or leaves. Keep away from water and traffic. Keep children away from the blower. 
Only the blower supplied should be used for inflation. 

Safety Warnings:   ELECTRICAL BLOWER

This blower is not a toy. Use under the direct supervision of a competent adult. Keep away from children. 

READ AND SAVE THESE INSTRUCTIONS.

T

S

E

T

T

E

S

E

R

GROUNDING METHODS

Grounding 

pin

!

!

!

DANGER

!

!

INSTRUCTIONS FOR BLOWER CLEANING AND STORAGE

Do not immerse the blower in water. Unplug the blower before cleaning. To clean: wipe with a damp cloth. The blower does not require 

any lubrication and has no user serviceable parts. Do not attempt to service the blower. When not in use, store the blower indoors in a 

dry place. Store the blower upright on a stable surface. Loosely coil the cord and place it beside the blower.  

LISTED

E234531

IMPORTANT - Inflatable Water Park MUST be drained of all water and be COMPLETELY DRY before storage in order to avoid mold and mildew.

DO NOT fold and store Water Park if any moisture remains.
IMPORTANT - All children MUST EXIT the Water Park before deflation or draining water.
IMPORTANT - For best results, 2-4 people should drain and move the Water Park. 

Draining & Deflation

1

Turn off the garden hose

Disconnect

2

Turn off the garden hose 

and disconnect it from the 

Clear Plastic Tubing.

4

Remove stakes and drag the Water Park 

away from the drained water to a dry area.

8

7

Once Water

Park is

completely

dry, turn off

the blower

motor and

unplug it

from the outlet.

Untie the drawstring from 

the short Outlet Tube and 

allow the Water Park to 

fully deflate. Remove the 

Hose Assembly and wrap 

it up with no kinks.

Remove and 

drain the Hose 

Assembly from 

the Water Park.

5

Re-stake the Water Park 

and blower, tie the 

Inflation tube to the 

blower, then reconnect 

and power up the blower.

6

Leave the Water Park inflated 

until all remaining water has 

evaporated and the Water 

Park is dry. This may take 2 

hours or more depending on 

weather conditions.

Turn off the blower
motor and unplug it
from the outlet.
Move the blower to dry
ground if it appears
that it will get wet
from draining water.

Switch power off

As the Water Park deflates, water will find 

the lowest point and drain from the 

        collapsing pool walls.

Lift the bottom of pool from one side to 

the other to let the remaining water drain.

3

CAUTION: ELECTRICALLY

INSTRUCTIONS FOR BLOWER INSTALLATION

WARNING: Failure to follow these instructions 
could result in serious injury or death. 

USE ONLY ON GFCI PROTECTED RECEPTACLES

CAUTION

WARNING: FAILURE TO FOLLOW THESE INSTRUCTIONS 
COULD RESULT IN SERIOUS INJURY OR DEATH. ADULT SET-
UP AND SUPERVISION REQUIRED.

DANGER - TO PREVENT ELECTRIC SHOCK, DO NOT IMMERSE 
IN WATER. WIPE CLEAN WITH DAMP CLOTH.

Meijer.com

Summary of Contents for 621437







Reviews: